ABB IRB 4400/45 Product Specification Download Page 7

Page: 7 / 68

Overview

3HAC9117-1

Rev.N

Overview

About this Product specification

It describes the performance of the manipulator or a complete family of manipulators

in terms of:

•

The structure and dimensional prints

•

The fulfilment of standards, safety and operating requirements

•

The load diagrams, mounting of extra equipment, the motion and the robot reach

•

The specification of variant and options available

Users

It is intended for:

•

Product managers and Product personnel

•

Sales and Marketing personnel

•

Order and Customer Service personnel

Contents

Please see Table of Contents on page 3.

Revisions

Revision

Description

Revision 8

- New values for Performance Acc. to ISO 9283 added

- M2000 cancelled.

Revision J

- Foundry Prime added

- Option 287-5 Wash removed

Revision K

- Text added to “Clean room robots”

- Footnote added to “Pose accuracy”

Revision L

- Changes in chapter Standards

- Directions of forces

- Warranty information for load diagrams

Revision M

- Maximum load and moment of inertia for full axis 5 movement

- Wrist torque

Revision N

- Changes for Calibration data

- Work range

- Explanation of ISO values (new figure and table)

- Stopping distance

- User documentation on DVD

Summary of Contents for IRB 4400/45





































































Search results

Summary of Contents for IRB 4400/45

Reviews:

Brands by name

Popular brands

ABB IRB 4400/45, Product Specification

Search results

Summary of Contents for IRB 4400/45

Reviews:

Brands by name

Popular brands