ABB IRB 4400/45 Product Specification Download Page 10

Page: 10 / 68

1 Description

1.1.1 Introduction

Rev.N

3HAC9117-1

Clean Room robots

The Clean Room robots are classified for clean room class 100 according to US

Federal Standard 209 or class 5 according to ISO 14644-1.

The performed clean room test has classify the air cleanliness exclusively in terms of

concentration of airborne particles generated by the robot. Other aspects of the clean

room test or other clean room requirements are not considered.

Operating system

The robot is equipped with the IRC5 controller and robot control software,

RobotWare.

RobotWare supports every aspect of the robot system, such as motion control,

development and execution of application programs, communication etc. See

Product specification - Controller IRC5 with FlexPendant.

Safety standards require a controller to be connected to the robot.

For additional functionality, the robot can be equipped with optional software for

application support - for example gluing and arc welding, communication features -

network communication - and advanced functions such as multitasking, sensor

control etc. For a complete description on optional software, see the Product

specification - Controller software IRC5/RobotWare.

Figure 1 The IRB 4400 manipulator has 6 axes.

Summary of Contents for IRB 4400/45





































































Search results

Summary of Contents for IRB 4400/45

Reviews:

Brands by name

Popular brands

ABB IRB 4400/45, Product Specification

Search results

Summary of Contents for IRB 4400/45

Reviews:

Brands by name

Popular brands