8
✔
Historical Review
Goto
Oldest data in
internal memory
Newest data in
internal memory
Target date
Target time
Returns to
the chart view
Goes to the chart
view, at the selected
date and time
Moves cursor between
target date and time boxes.
Use
and
keys to
change selected date or time
Exit
…2
OPERATION
Notes.
While in Historical Review mode:
• Recording of new data continues unless stopped from the Setup Menu – see
Section 3.4.
• Invalid historical data (e.g. when recording has stopped) is denoted by '– – –' in the
digital indicator.
• Where the trace at the cursor position represents more than one sample, the indicators
flash between the maximum and minimum values of those samples.
• Menu options remain active – allowing the screen interval to be changed, different scales
and channels to be selected, etc.
• Operator messages generated are added to the alarm event log at the present time, not
the time indicated by the cursor.
• All data stored in the instrument's internal memory can be viewed.
• The display can be scrolled back to the start of the oldest data.
• Archiving to removable media does not occur but all data recorded in the internal
memory buffer during this time is archived on exiting Historical Review mode.
Select 'Goto' to move to data stored in the instrument's onboard memory that was
recorded at a specific date and time.
Notes.
• Once internal memory becomes full, oldest data is overwritten by newest data. If
historical review has been selected for some time, the oldest data present may no longer
be available.
• The instrument exits Historical Review mode automatically after 15 minutes if no key is
pressed.
Select Exit to return to the real-time recording display.
Note.
Pressing the
or
key also exits Historical Review mode and displays the next
enabled view.
…2.3
Chart Views
