37
ABB i-bus
®
KNX
Project design and programming
In the parameter window
Channel X
or
Channels
(for global channel
configuration), the settings for the individual channels or for all the channels
together are carried out.
The parameter windows
Channel B to H
are only visible if the setting
“individual” has been selected for “Channel setting” in the
General
parameter window.
Fig. 20:
Channel X
– Normal operating mode
In normal mode, the channel functions as a standard DALI dimming output.
Brightness value when turned on:
This parameter indicates the brightness
value with which the DALI device switches on after receipt of an ON telegram “1”.
If a value should be set which lies outside the minimum or maximum dimming
values, the brightness is restricted during operation to the minimum or
maximum dimming limit values.
If the channel is already switched on at any brightness value and then receives
an ON telegram “1”, the parameterised starting value is set.
4.3.2
Parameter window:
Channel X
4.3.2.1 “Normal” operating mode
...
...
...
...
...
...
