![background image](http://html1.mh-extra.com/html/abb/ht575362/ht575362_operation-manual_3434519048.webp)
Operation Manual / 4 Product description / A100-M axial
3 Commissioning / 3.1 Oil supply
© Copyright 2017 ABB. All rights reserved.
HZTL4033_DE
Revision B
December 2017
3
Commissioning
3.1
Oil supply
3.1.1
Introduction
In all operating states, a functioning and carefully executed oil supply is an important pre-
requisite for trouble-free operation of the turbocharger.
The lubrication of the turbocharger is usually carried out with oil from the engine oil circula-
tion.
u
Comply with the enginebuilder's specifications regarding the selection of lubricating oil
and the oil change intervals.
For more information on the oil supply, refer to Chapter
.
3.1.2
Pre-lubrication and post-lubrication
The pre-lubrication time is at least 2 minutes.
The post-lubrication time is 10 minutes.
If the engine is operated in idle mode 10 minutes before stopping, no additional post-lubric-
ation is required.
3.1.3
Oil filtering
Filtering of the lubricating oil with a filter mesh width of
≤
0.050 mm
is sufficient for the tur-
bocharger.
3.1.4
Oil pressure
Comply precisely with the oil pressure before the turbocharger for trouble-free operation.
Page
18
/
99