![background image](http://html1.mh-extra.com/html/abb/ht574427/ht574427_operation-manual_3431316093.webp)
Operation Manual / 4 Product description / A100-M axial
8
Disassembly and assembly
Page 63 / 113
© Copyright 2016 ABB. All rights reserved.
HZTL4033_EN
Revision A
July 2016
8.5
Removing the compressor casing
Removing wall insert
Figure 29: Removing wall insert
1. Loosen screws (72011) and remove with washers (72008).
2. To secure the wall insert, screw in one screw (72011) a third of the way.
3. Press off wall insert with three press-off screws (90900) until the lifting device
(90190/90195) can be fitted.
4. Using shackle (90195) and lifting gear, fit lifting device (90190) to wall insert (77000).
5. Put on shackle (90195) and fasten to lifting gear.
6. Remove locking screw (72011).
7. Pull out wall insert (77000).