![background image](http://html1.mh-extra.com/html/abb/ht574427/ht574427_operation-manual_3431316106.webp)
Operation Manual / 4 Product description / A100-M axial
8
Disassembly and assembly
Page 76 / 113
© Copyright 2016 ABB. All rights reserved.
HZTL4033_EN
Revision A
July 2016
Installing turbine diffuser
Figure 45: Installing turbine diffuser 1
1. Using lifting gear, move turbine diffuser (63000) in over guide studs (90802) until the lifting
gear is on the gas outlet casing.
2. Fit guide plates (90328) with nuts (61037).
3. Remove the lifting gear.
4. Slide in turbine diffuser as far as it will go.
5. Remove nuts (61037), guide plates (90328) and guide studs (90802).
Figure 46: Installing turbine diffuser 2
Part number
A170-M
A175-M
61069
M14
130 Nm
M16
200 Nm
Table 35: Tightening torque (61069)
6. Coat threads of screws (61069) with high-temperature grease.
7. Fit and tighten screws (61069).