Operation Manual / 4 Product description / A130-M.. - A145-M..
6
Periodic maintenance work
Page 45 / 115
© Copyright 2015 ABB. All rights reserved.
HZTL4031_EN
Revision C
February 2016
6
Periodic maintenance work
6.1
Foreword to maintenance
Maintenance work includes regular visual controls and cleaning operations which are intended
to ensure the trouble-free functioning of the turbocharger.
NOTICE
Cleaning method
To allow you to observe the standard service intervals and to maintain a high
turbocharger efficiency, ABB Turbo Systems recommends that the cleaning
procedure be carried out during operation. This allows the thermal load of
the engine to be kept low while ensuring maximum fuel efficiency.
Maintenance interval Maintenance work
Operating status
24 … 72 h
1)
Cleaning the compressor during operation [➙
46] Engine load 50 … 85 %
50 … 200 h
1)
Cleaning the turbine during operation [
Engine load 20 … 40%
(guideline value)
Similar to the service
interval (usually every
8000 … 12000 h)
2)
Cleaning components mechanically
Engine stopped
Table 11: Maintenance table
[h] = Hours of operation
1)
If the maintenance intervals are incompatible with operation of the engine, contact ABB
Turbo Systems.
2)
ABB Turbo Systems recommends having mechanical cleaning carried out by an ABB
Turbocharging Service Station during the service work. Otherwise, only carry out mechanical
cleaning if cleaning during operation is not sufficient to achieve the thermal load and the rating
of the engine.
