12
Emergency stop LED
A row of LEDs is integrated in the housing, below the emergency stop button.
Attention!
The controls for the feedback LED are independent from the emergency stop button function.
The programmer is solely responsible for their signaling function.
ABB Electrification Sweden AB does not accept any liability for damages of any kind caused by signaling
that is not logical, and the resulting misjudgements and errors by users.
Red LED row
(controlled via AS-i Bus)
Green LED row
(is is possible to activate and controlled according the following table)
LED row red
controlled via AS-I Bus
function LED green
controlled via AS-I Bus
LED row green
Off
not activated
Off
On
not activated
Off
Off
activated
On
On
activated
Off
