Connection and installation
Product manual 2CKA001473B9364
│
15
Fitting the thermostat (factory settings)
1. Turn the old thermostat to fully open.
2. Loosen the fixture and pull the
thermostat head off the valve.
3*. If the union nut does not fit on the
valve, attach the adapter.
– Completely remove the
connecting pieces (marked with
scissor symbol) of the plastic
adapters before using one of the
enclosed adapters!
– If the valve has a thread size
different to M30 x 1.5 mm, please
use one of the listed adapters,
see chapter 3.2 “Additional
necessary components“ on page
8. However, these must be
ordered separately.
4. Fit the thermostat to the valve or the
adapter.