Commissioning
Product manual 2TMD041800D0042
│
18
8.5.1
Pre-configuration mode
This mode is usually used for a simple project, e.g. a building which has not more than 18 floors
above the ground floor.
This mode can guide you through completion of all configuration work step by step.
User case 1
Question
Answer
Which floors need to support the
elevator control?
-1, 1, 2, 3, 4, 5, 6
Where are the outdoor stations
installed?
Outdoor station 1 is installed on floor 1
Outdoor station 2 is installed on floor -1
Is the "call elevator from indoor
station" function needed?
Yes
The following steps below are based on the user case 1, please adjust the settings according to
the actual case:
[1] On the "Settings" screen, select "Preconfigured" from the drop-down list.
