ABB H569-445, Product Manual

Page: 37 / 48

Page 37
© Copyright 2021 ABB. All rights reserved.
Programming the Meter
(Continued)
Table 4 VIM1C Meter Parameters
Item System
Parameters
Description
Load Overload Type
The Power Overload Type defines whether the smart meter is to treat the Overload alarm event for
a “ Single Bus ” or for a “ Redundant Bus ” configuration. The “ Single Bus ” configuration is
exceeds this
threshold, the controller asserts the Over Load (OVL) alarm. Factor default is “ Single
Load Overload
The Load Overload (OVL) alarm event is triggered when any measured panel currents exceed their
respective configured thresholds. These OVL thresholds can be configured from 1 - 4000A.
16 Load Overload Delay
Assigned Circuits
measurement capability. These circuits are pre - wired with fixed positions in the BDFB. If circuit
Item Control and
operations
Description
18 Start Lamp Test Cycles the illumination of the front panel LED and Backlight through Red, Amber, and Green
19 Clear Latched Events
Clears a latched Overload Alarm event. Note the Overload Latched Event must be enabled to
Start Alarm Test
Asserts Form - C alarms available at connector in fixed sequence: Fuse Alarm (FA), Power Loss
(PL), and Overload (OVL). Alarm asserted is displayed on the front panel. Feature can be