manualshive.com logo in svg

ABB FS4000-SR4, Operating Instruction

Share
Download
ABB FS4000-SR4 Operating Instruction Download Page 10

Safety 

 

10 

FV4000-VT4/VR4 / FS4000-ST4/SR4 

D184B097U02 

 

 

1.5 

Approved media 

 

When using media, please note: 

•  Media (fluids) may only be used if, based on the state of the art or the operating experience 

of the user, it can be assured that chemical and physical properties of the components 
coming into contact with the fluids will not be adversely affected during the operating period. 

•  Specifically chloride media can cause not visible corrosion damages to all media wetted 

components so that fluid can lead. The suitability of these materials for each application by 
the operator to examine. 

•  Media (fluids) with unknown properties or abrasive media may only be used if the operator 

can perform regular and suitable tests to ensure the safe condition of the meter. 

•  Observe the information on the name plate. 
 

 

The meter tube, solid bodies (FV4000-VR4, FV4000-VT4 Vortex flowmeters only), inlet and 
outlet pipes (FS4000-SR4, FS4000-ST4 Swirl flowmeters only), sensor and gasket come into 
contact with the measured medium. 

 

 

1.6 

Warranty provisions 

 

Using the device in a manner that does not fall within the scope of its intended use, disregarding 
this manual, using underqualified personnel, or making unauthorized alterations releases the 
manufacturer from liability for any resulting damage. This renders the manufacturer's warranty 
null and void. 
 

Summary of Contents for FS4000-SR4









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands