Section E
Logs
E-13
Specifies whether and how a copy of the log file is to be transferred from the DigiVis PC to an-
other PC. The PC selected to receive the archive must have a network communication link to the
DigiVis PC. Furthermore, on target stations with Windows NT operating system, the ‘Microsoft
Peer Web Services’ with FTP service must be installed. These services are included in the NT
delivery package. Once installed, they start up independently on login to NT.
Archives are normally sent direct to the target station with its own station address. A further pos-
sibility is to export the archive files to a Windows drive on the DigiVis PC. This drive can be
mapped on to another PC in the Windows NT network. In this case the station address is its own
TCP-IP address.
An add-on Freelance 2000 program called
DigiBrowse
is provided to allow the archiving PC to
display the log archives and convert them to CSV format.
Automatic
file transfer
The mode of file transfer enabling or disabling is specified.
Enable/disable
Enable FT with
DigiVis start
As soon as DigiVis is started, file transfer is enabled.
File transfer is not automatically enabled when DigiVis is started.
Event controlled
File transfer is enabled or disabled depending on the status of the event
module entered. It is mandatory to specify an event module.
Press the function key F2 to bring up a selection list with event func-
tion blocks.
File transfer cannot be enabled in event-controlled mode.
Manual controlled
The operator at the operator station can enable or disable file transfer.
File transfer cannot be enabled or disabled manually.
Trigger
This area in the parameter mask is used for specifying how file transfer is to
be triggered.
After file
completion
This mode is the default setting for the signal sequence log.
Cyclic, Cycle time
This time parameter is used to specify the cyclical time interval between
copies of the log file being written to the specified target station. Entered
in time format (e.g. T#10h).
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827
Summary of Contents for Freelance 2000
