ABB FPTC-02, User Manual

Page: 52 / 96

Description Name Index
Displays the status of FPTC modules. The
word can be used as the source of eg. ex-
ternal events. This parameter is read-only. FPTC status word 35.04
Description Name Bit
1 = Yes: An FPTC module has been detec-
ted in slot 1. Module found
in slot 1 0
1 = Yes: The module in slot 1 has an active
SMT fault. Fault active in
slot 1 1
1 = Yes: The module in slot 1 has an active
motor temperature warning. Warning active
in slot 1 2
1 = Yes: An FPTC module has been detec-
ted in slot 2. Module found
in slot 2 3
1 = Yes: The module in slot 2 has an active
SMT fault. Fault active in
slot 2 4
1 = Yes: The module in slot 2 has an active
motor temperature warning. Warning active
in slot 2 5
1 = Yes: An FPTC module has been detec-
ted in slot 3. Module found
in slot 3 6
1 = Yes: The module in slot 3 has an active
SMT fault. Fault active in
slot 3 7
1 = Yes: The module in slot 3 has an active
motor temperature warning. Warning active
in slot 3 8
Reserved 9…15
Contains hardware-related settings that can
be enabled and disabled by toggling the
specific bits. Special HW settings 95.15
Description Name Bit
1 = The driven motor is an Ex motor
provided by ABB for potentially explosive
atmospheres. This sets the required minim-
um switching frequency for ABB Ex motors. EX motor 0
For non-ABB Ex motors, contact your local
ABB representative.
￭ Switching frequency limitation
The certificate of the Ex motor typically requires that you set a
minimum limit for the switching frequency of the drive.
52 Parameter settings