ABB FPTC-01, User Manual

Page: 64 / 108

Parameter settings 63
92.01 Encoder 1
type HTL1 Activates or deactivates the
communication with the safety pulse
encoder interface module 1 and sets
the type for the safety pulse encoder.
92.02 Encoder 1
source Module 1 Sets the safety pulse encoder
interface module that the safety pulse
encoder 1 is connected to.
92.10 Pulses/revolut
ion 2048 Sets the number of HTL pulses per
revolution for safety pulse encoder 1.
Adjust the default value to meet the
safety pulse encoder in use. Make
sure that the value is according to the
encoder nameplate.
92.17 Accepted
pulse freq of
encoder 1 300 kHz Sets the maximum pulse frequency
range of encoder 1.
Adjust the default value to meet the
motor and safety pulse encoder in
use. You can use this formula to
define the value:
r_max x p 10%, where
• r_max = the maximum motor speed
(rpm) used in the application (or the
motor nominal speed)
• ppr_enc = Pulses/revolution of the
safety pulse encoder (parameter
92.10 ).
Set the parameter value in kHz.
For more information, see the FSO-21
module user’s manual.
Index Name Example
value Description