ABB FPTC-01, User Manual

Page: 57 / 108

56 Parameter settings

General parameters
Set these FSO parameters always when you use the FSO module
with the FPTC-01 module.
Index Name Example
value Description
FSOGEN.
11
Stop
completed
output
None
1)
Sets the digital output that indicates
the completion of any stop function.
Active when the FSO module has
completed the STO, SSE or SS1
function.
FSOGEN.
21
Motor
nominal
speed
1500 rpm Sets the nominal motor speed. Adjust
the default value to meet the motor in
use.
FSOGEN.
22
Motor
nominal
frequency
50 Hz Sets the nominal motor frequency.
Adjust the default value to meet the
motor in use.
FSOGEN.
41
Power-up
acknowledge
ment
Automatic Sets the power-up acknowledgement
method of the FSO module.
Automatic : You do not need to push a
reset button after switching on the
FSO module. The FSO module
generates the acknowledgement
signal automatically after the power-
up.
Manual: The FSO module reads the
external acknowledgement signal
through the digital input defined by
parameter
FSOGEN.42 .
Make sure that the value is Automatic .
FSOGEN.
42
Acknowledg
ement button
input
None
1)
Selects the digital input for the
acknowledgement signal when
parameter
STO.02 has value Manual .
In the safety function described in this
manual, parameter
STO.02 has value
Automatic and this parameter has
value None (no acknowledgement
signal connected to the input).