ABB FPTC-01, User Manual

Page: 60 / 108

Parameter settings 59
STO.13 Restart delay
after STO
2000 ms Sets the time after which the restart
of the drive is allowed after the FSO
module has activated the STO
function and opened the drive STO
circuit. With this parameter, you can
allow a restart of the drive before the
motor has stopped (fly-start). This
parameter is valid only if the STO
function is requested from STO
input A (
STO.11 ) or STO input B
( STO.12 ).
Adjust the value when necessary. If
you do not want to use the fly-start
feature, set this parameter to the
same value as parameter
STO.14 .
STO.14 Time to zero
speed with
STO or
modoff
2)
2000 ms Sets the time after which the
acknowledgement is allowed after
coast stop in the STO and SSE
functions. Configured to the
estimated time in which the motor
coasts to a stop from the maximum
speed.
This parameter sets the time after
which the STO function is
completed. Parameter
STO.13
defines the time after which the
restart of the drive is allowed. Adjust
the value when necessary.
Note : The default value after factory
reset is 3,600,000 ms . Always check
this parameter after factory reset.
SBC usage
SBC.11 STO SBC
usage
None Sets how the mechanical brake is
used together with the STO function.
In the safety function described in
this manual, this feature is not used.
Make sure that the value is
None .
See also section Mechanical brake
control on page 64 .
Index Name Example
value Description