ABB FOCH, Hardware Manual, Page: 30 / 38

information, contact your local ABB distributor or consult European Chemicals Agency's
SCIP database to find out which SVHCs are used in the drive, and to find out where
those components are located.
Contact your local ABB distributor for further information on environmental aspects.
End of life treatment must follow international and national regulations.
For more information on ABB end of life services, refer to
new.abb.com/service/end-of-life-services .
Markings
These markings are attached to the drive:
CE mark
Product complies with the applicable European Union legislation. For fulfilling the EMC re-
quirements, see the additional information concerning the drive EMC compliance
(IEC/EN 61800-3).
UL Listed mark for USA and Canada
Product has been tested and evaluated against the relevant North American standards by
the Underwriters Laboratories. Valid with rated voltages up to 600 V.
Electronic Information Products (EIP) symbol including an Environment Friendly Use Period
(EFUP).
Product is compliant with the People’s Republic of China Electronic Industry Standard (SJ/T
11364-2014) about hazardous substances. The EFUP is 20 years. China RoHS II Declaration of
Conformity is available from
https://library.abb.com .
WEEE mark
At the end of life the product should enter the recycling system at an appropriate collection
point and not placed in the normal waste stream.
30 Technical data