ABB FlexPendant, Product Manual

Page: 34 / 46

Note Action
Examine the integrity of all the external plastic
elements. 3
Examine the cable jacket and make sure that the
cable is not twisted. Use the black line print on
the cable to detect torsion. 4
Examine that the cable stopper is in place and
cannot be moved. 5
Examine that no foreign objects or liquids are in-
side the cable reel. If so, remove it. 6
If the brake too fast, then it should
be replaced, see
Replacing the
brake on page 37 .
xx1600000640
To test the stop device, retraction spring, and
brake:
1 Pull out at least 2 meters of the retractable
cable to make sure that the stop device is
working, that is, that the cable stays pulled
out. There should be a click-clack sound
while pulling out the cable.
2 Pull out the entire retractable cable and
release it so the cable retracts. Examine
that the entire cable length is retracted
slowly.
3 Pull out cable and release it. Stop the re-
traction to make sure that the stop device
is working.
4 Repeat 4 times.
7
Examine that there is sealing glue on all locking
screws. Do not remove the glue. 8
Examine the cleaning roller. 9
Examine the handle. 10
34 Product manual - FlexPendant Retractable Cable
3HAC048816-001 Revision: B
© Copyright 2015-2016 ABB. All rights reserved.
3 Maintenance
3.2 Inspecting the complete FlexPendant Retractable Cable
Continued