1.3 Important
note
1.4
Labelling of the EIB Delta-
Meter (Example)
EIB Delta-Meters are intended solely for the measurement of electrical
energy. The installation and commissioning may only be carried out by
authorised electrical specialists. The appropriate norms, guidelines,
regulations and specifications should be observed when planning and setting
up electrical installations.
Advisory:
– EIB Delta-Meters should be protected from damp, dirt and damage during
transport, storage and operation.
– EIB Delta-Meters should not be operated outside the specified technical
data.
– Sufficient cooling for the EIB Delta-Meter must be allowed for.
Cleaning:
If devices become dirty, they can be cleaned using a slightly damp
cloth and soap solution should a dry cloth not remove the dirt.
Corrosive materials or solutions should never be used. EIB Delta-
Meters should always be disconnected from the supply prior to
cleaning.
Maintenance:
EIB Delta-Meters are maintenance-free. No repairs should be
carried out if damage occurs (e.g. during transport or storage).
The warranty expires if the EIB Delta-Meter is opened.
Standard meters
EIB Delta-Meter
Electricity Meters
5
ABB i-bus
®
EIB
GH V784 0000 R0100
3 x 230/400 V~
50/60Hz
5(65) A Kl.2
ABB i-bus EIB
®
1000 Imp/kWh
LED
SBE 21M000-200 2000 – 08 4600 55556
DZ 4000 W E
Type designation
Symbol for type of
network and load
Nominal current
(limit current)
Accuracy class
Communication
system
Nominal frequency
Serial no.
Wiring diagram
(DIN 43 856)
Nominal voltage
LED frequency
(meter constant)
Date of
manufacture
EIB conformance
symbol
Identification no.
V 1.08 042
