2CCF018900R0002-CH | AC Charger for Electric Vehicles, Model eCharger 25
1.7 Type
label
The type label is located on the outer right side of the
charging station, see fig. 19.
Fig. 1:
Type label
1 Manufacturer
2 Type designation
3 EAN Code
4 Serial number
5 Nominal voltage, nominal current, nominal frequency
6 Degree of protection
7 Date of manufacturing
1.8 Type
designation
Fig. 2:
Type description matrix
1.9
Safety notes for transport
Please note:
-
Do not expose the charging station to humidity
during transport. Choose adequate packaging.
-
Choose packaging so that the charging station is
protected against shock, e.g. through air-cushioned
packaging.
Before installation it is advised to check for damages caused
by improper transport. Damages resulting from transport
should be noted on the transport documents. Any
compensation against the forwarder must be claimed
immediately and before installation.
1.10 Conditions
for
Storage
-
The charging station should be stored in a dry and
dustless
manner. It should only be stored/moved
using the original or equally adequate packaging.
-
The acceptable conditions for transport and
storage can be read in chapter “Technical Data”.
-
In general, the possible time of storage is
unlimited; however the warranty conditions stated in
the order confirmation of the supplier apply.
1.11
Safety notes for electrical installation
The electrical installation must be made by authorized
personal according to this manual. Instructions for electrical
installation should be observed otherwise the electrical
protection could be compromised.
1.12
Safety notes for operation
Before commissioning make sure that all requirements listed
in chapter “Technical Data” and in the data sheet are met. If
a safe operation cannot be guaranteed, stop the operation of
the charging station and ensure that it cannot be used
unintentionally.
1.13 Returning
the
charging
station
For returning of the charging station for repair, use the
original or equally adequate packaging. Please attach the
completed return form (see annex).
Contact Service
Please contact your local ABB sales unit.
For technical questions please refer to:
1.14 Integrated
management
system
ABB Switzerland Ltd. Low Voltage Products has an
integrated management system, consisting of:
— Quality-Management-System ISO 9001:2008,
— Environmental-Management-System ISO 14001:2004,
— Management-System for occupational and health
protection BS OHSAS 18001:2007
— Data- and information protection system
The environmental aspect is an important part of our
corporate policy. Pollution of the environment and people
should be kept at a minimum during production, storage,
transport usage and disposal of our products and solutions.
This especially refers to the careful use of natural resources.
Through our publications, we are in a permanent dialogue
with the public.
1.15 Disposal
The product is made of material that can be recycled by
specialized recycling companies.
Typ: CUA2-U1T2L-16M3
EAN:
SN:
1 x 230 VAC
16A
50/60 Hz
IP 44
Date of manufacturing
Made in Switzerland
1
2
3
4
5
6
7