ABB DP7-S-611 Manual Download Page 60

Page: 60 / 70

ABB-Welcome

— 60 —

5.2.12.16 Firmware Update

If the firmware for your device is to be updated, carry out the following steps:

Get the new version of firmware from your electrical installer, and copy it into a SD-

card.

Insert the SD-card into the card slot on your indoor station.

3. Select “Firmware Update”

Execute the firmware updated by selecting “Updating”

5. Confirm the popup with “yes”.

The firmware updates are made available on the Internet at www.buschjaeger.com

If the firmware for your device is to be updated, carry out the following steps:

On page www.busch-jaeger.com enter the article number of the device in the
"Search" section.

The page changes to the area of the device.

If an update for the firmware is available, it is ready for downloading in this area.

The package for downloading includes the firmware and instructions on how to
install the firmware.

Install the firmware according to the downloaded instructions.

Pos: 67 /Di nA4 - A nleitu ngen Onlin e/Ueb ersc hrift en/2 ./Reini gung @ 1 9\m od_ 131 0733 980 533 _15. docx @ 10 785 3 @ 2 @ 1

Summary of Contents for DP7-S-611







































































Search results

Summary of Contents for DP7-S-611

Reviews:

Related manuals for DP7-S-611

Brands by name

Popular brands

ABB DP7-S-611, Manual

Search results

Summary of Contents for DP7-S-611

Reviews:

Related manuals for DP7-S-611

Brands by name

Popular brands