ABB-Welcome
|
— 59 —
*) free@home:
Commissioning is always carried out via the Web-based surface of the System Access
Point.
The System Access Point establishes the connection between the free@home
participants and the smartphone, tablet or PC. It is used to identify and program the
participants during commissioning.
Devices which are physically connected to the free@home bus, log themselves
automatically into the System Access Point. They transmit information about their type and
supported functions.
In the panel configuration the buttons of the ABBfree@homeTouch 7" can be freely
equipped.
All panels in the system and the favourites bar can be selected from the bottom selection
bar.
Important: Only panels appear that have been previously positioned on the floor plan
under commissioning step "Allocation"!
The allocated actuator channels can be positioned on the panel via drag-and-drop from
the list view.
After the confirmation the configuration is taken over and becomes visible on the device
after a few seconds.
Note
General information about commissioning and parameterization is available
in the technical reference manual and the online Help of the System Access
Point.
Summary of Contents for DP7-S-611
Page 27: ...ABB Welcome 27 1 2 2 3 4 ...
