ABB-Welcome
|
— 6 —
2.3
Improper use
Each use not listed in chapter 2.2 is deemed contrary to intended use and can
lead to the injury of persons and damage to property.
Busch-Jaeger is not liable for damages caused by use deemed contrary to the
intended use of the device. The associated risk is borne exclusively by the
user/operator.
The device is not intended for the following:
»
unauthorized structural changes,
»
repairs,
»
use outdoors or in bathroom areas,
»
use with an additional bus coupler.
2.4
Target group / qualification of personnel
Installation, commissioning and maintenance of the device must only be
carried out by trained and properly qualified electrical installers.
The electrical installers must have read and understood the manual and follow
the instructions provided.
The electrical installers must adhere to the valid national regulations in their
country governing the installation, functional test, repair and maintenance of
electrical products.
The electrical installers must be familiar with and correctly apply the "Five
safety regulations" (DIN VDE 0105, EN 50110):
1. Disconnect from power
2. Secure against being re-connected;
3. Ensure there is no voltage;
4. Connect to earth and short-circuit;
5. Cover or barricade adjacent live parts.
2.5
Safety instructions
W arning
Dangerous currents flow through the body when coming into direct or
indirect contact with live components.
This can result in electric shock, burns or even death.
»
Disconnect the mains power supply prior to installation and/or
disassembly!
»
Permit work on the 110-240 V supply system to be performed by
Summary of Contents for DP7-S-611
Page 27: ...ABB Welcome 27 1 2 2 3 4 ...
