ABB DCS800, Installation And Start-Up Manual

Page: 20 / 66

18
Hardware
3ADW000197R0101 DCS800-R Sel e a
Regulatory Compliance
(*)
The converter module and enclosed converter components are designed for use in industrial envi-
ronments. In EEA countries, the components fulfil the requirements of the EU directives, see table
below.
European Union Directive Manufacturer's Assur-
ance
Harmonized Standards
Converter module Enclosed converter
Machinery Directive
98/37/EEC
93/68/EEC Declaration of Incorpora-
tion EN 60204-1
[IEC 60204-1] EN 60204-1
[IEC 60204-1]
Low Voltage Directive
73/23/EEC
93/68/EEC Declaration of Conformity EN 61800-1
[IEC 61800-1]
EN 60204-1
[IEC 60204-1] EN 60204-1
[IEC 60204-1]
EN 60204-1
[IEC 60204-1]
EMC Directive
EN 61800-3
➀
[IEC 61800-3]
EN 61800-3
➀
[IEC 61800-3]
89/336/EEC
93/68/EEC Declaration of Conformity
(Provided that all installa-
tion instructions concern-
ing cable selection, ca-
bling and EMC filters or
dedicated transformer are
followed.)
➀
in accordance with
3ADW 000 032
➀
in accordance with
3ADW 000 032/3ADW 000
091
North American Standards (*)
In North America the system components fulfil the requirements of the table below.
Rated supply voltage
Standards
Converter module Enclosed converter
to 600 V • see UL Listingwww.ul.com / certifi-
cate no. E196914
Approval:
c
UL
us
The spacings in the modules were
evaluated to table 36.1 of UL 508 C.
Spacings also comply with table 6 and
table 40 of C22.2 No. 14-05.
• or on request
UL types: on request
>600 V to 990 V EN / IEC xxxxx see table above.
Available for converter modules in-
cluding field exciter units.
EN / IEC types: on request
(for details see table above)