Chapter 1 - Introduction
DCS 500 / DCS 600 Service Manual
VI A
1 - 1
How to use this manual
The purpose of this service manual is to provide detailed informa-
tion on how to service power converters from the
DCS 500
or
DCS
600
series.
Note:
If it is not mentioned explicitly all details given in
this Service Manual will be valid for both,series
DCS 500 and series DCS 600!
Contents of this manual
Chapter 1 - Introduction
This chapter informs about the contents and the use of this manual
as well as the boundary conditions applying and the thyristor power
converter rating plate.
Chapter 2 - Fault Tracing Thyristors
This chapter describes how to detect and select a faulty
thyristor.
Chapter 3 - Handling the Semiconductors
This chapter describes the handling of thyristors and thyristor
modules.
Chapter 4 - Exchange of Thyristors of Sizes C1/C2/C2b
This chapter describes the exchange of thyristors in converters
sizes C1/C2.
Chapter 5 - Exchange of Thyristors of Size A5
This chapter describes the exchange of thyristors in converters
size A5.
Chapter 6 - Exchange of Thyristors of Size C3
This chapter describes the exchange of thyristors in converters
size C3.
Chapter 7 - Exchange of Thyristors of Size C4
This chapter describes the exchange of thyristors in converters
size C4.
Chapter 8 - Compatibility of SDCS-PIN-2 boards
This chapter describes the compatibility, utilization and remov-
ing/mounting of power interface boards PIN-2x/PIN-20x.
Chapter 9 - Preventive Maintainance
This chapter describes the measures for preventive maintenance of
the thyristor converters.
Appendix A - Spare Parts list
The
Appendix A contains the spare parts list of the converters.
3ADW000093R0601_DCS500B/DCS600_Service Manual_e_f
