2
Confi guration Mode of MicroBrowser (Kiosk-Mode)
1. The MicroBrowser can run in “Kiosk-Mode” where the menu and the task
bar will disappear.
To activate the Kiosk-Mode open
My Device\Flash\MicroBrowser
and
doubleclick on the icon
KioskMode
.
2. To activate the menu and task bar doubleclick the icon
NoKioskMode
.
Default is NoKioskMode.
Autostart of MicroBrowser
1. To automatically start the MicroBrowser at startup of the
Control Panel open
My Device\Flash\MicroBrowser
and
doubleclick the icon
Enable_Autostart
.
2. To deactivate the autostart of the MicroBrowser doubleclick
the icon
Disable_Autostart
.
Start MicroBrowser
To start the MicroBrowser doubleclick the icon
MicroBrowser
.
The dialog of the host or IP address appears.
Default remote address is
“http://192.168.0.1/webvisu.htm”.
Change this IP address to the address of your remote web server (IP address of target PLC).
This address will be stored unless you change to Kiosk-Mode or NonKiosk-Mode
like described above.
To access the CoDeSys web server of AC500 type
webvisu.htm
in the fi eld
Path or full URL
.
If you select the checkbox
Always use these settings
this confi guration dialog will not appear
anymore, unless you change to Kiosk-Mode
or NonKiosk-Mode like described above.
3
Exit MicroBrowser
• If the MicroBrowser is not running in Kiosk-Mode use
File\Exit
from the menu bar.
• If the MicroBrowser is running in Kiosk-Mode connect a USB-Keyboard and
press <Shift> + <X>
• In the CoDeSys visualization an exit button can be created. Choose the
category
Input
.
Enable
Execute program
. Select
(INTERN) EXITPROGRAM
as confi gured
program.
• If Autostart is enabled and no keyboard is available:
Create a fi le
autoexec.bat
with the following line “del \Flash\autoexec.bat”.
Copy this fi le to the root of an USB-Stick and insert it while the
Control Panel is running.
Reboot the Control Panel. After the reboot the autostart is disabled.
2CDC159011M0201 / 08.2011