Operation
20
ABB, 1SBC159102M0201
Then select
Application/Download Firmware and Application
in CP400Soft if
it is a first time to download the application to the operator terminal; otherwise,
select
Application/Download Application
. The following appears on the screen
while the operator terminal is downloading:
7.6 Uploading an Application
An application can also be uploaded from the operator terminal to the PC.
Thus, a user can save an application as a *.V6F file in CP400Soft for future use.
Make sure that the operator terminal and the PC are connected according to
section
7.5 Downloading an Application
. Set the dip switch
SW7 = ON
. After
the self-test, the system menu will be displayed on the screen and the operator
terminal is ready to upload the application.
Also make sure that communication parameters are correctly configured. Select
File/Upload Application
in CP400Soft and the
Save As
dialog box will appear
on the screen. Enter the name of a firmware file (*.AF6) to save. Click
Save
.
Then the operator terminal will prompt for a password: enter the password set
in CP400Soft from
Application/Workstation Setup
. Once the correct password
is entered, the operator terminal starts to upload the application to the PC. For
information about setting a password, please see section
.
Warning:
To avoid an electrical shock, be sure to switch off the power before connecting the
communication cable to the operator terminal.
