Contact u
s
IN/Ra
n
dC/003–EN Rev
.A
0
8.2016
6.7 Undo / Redo
Note
: The following parameters are not included as part of
a configuration upload and download:
–
Instrument Serial Number
–
Security passwords and Settings
–
Display Contrast & Brightness settings
–
Input and Output calibration data
These parameters are unique to the instrument, and settings
must be adjusted accordingly.
1.
Use the
Undo
,
Redo
icons to undo or redo changes made
to the configuration.
Changed parameters are indicated by the
icon placed
next to a changed parameter and also within the parameter
tree to indicate where configuration changes have been
made.
Note
: The pencil icon disappears once the configuration
has been saved. Unsaved writes to the instrument are
identified by the pencil icon, but closing ConfigPilot loses
any changes still marked with the pencil.
6.8 Generating a configuration report
1.
Select the
Report
icon to open the report generation
window.
2.
By default all parameters are included in the report.
Parameters can be excluded / included at the menu level
by selecting from the tree view on the left hand side and
clicking on the
Update
button.
3.
When the required parameters have been selected the
report can by saved in Word
®
, Excel
®
or PDF formats, or
directly printed from the application.
6.9 Changing build options for the configuration
1.
Select the
Build
icon to open the build options window.
2.
The build of the instrument you want to create a
configuration for can be modified.
3.
Once completed, press
OK
to return to the
Configuration
window.
6.10 Application settings
1.
Select the
Settings
icon to change the application language
and theme.
6.11 Application information
1.
Select the
About
icon to change the application and
compatible instruments.
Note
. While it is possible to open multiple sessions of
ConfigPilot, usually it is only possible to connect to an
instrument through the first session (only 1 session at a time
may perform read and write to the ControlMaster).
Acknowledgements
Windows, Word, Excel are registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Note
We reserve the right to make technical changes or modify the contents of this
document without prior notice. With regard to purchase orders, the agreed
particulars shall prevail. ABB does not accept any responsibility whatsoever for
potential errors or possible lack of information in this document.
We reserve all rights in this document and in the subject matter and illustrations
contained therein. Any reproduction, disclosure to third parties or utilization of its
contents in whole or in parts – is forbidden without prior written consent of ABB.
Copyright© 2016 ABB
All rights reserved
ABB Limited
Process Automation
Howard Road, St. Neots
Cambridgeshire, PE19 8EU
UK
Tel:
+44 (0)870 600 6122
Fax:
+44 (0)1480 213 339
Mail:
ABB Inc.
Process Automation
125 E. County Line Road
Warminster, PA 18974
USA
Tel:
+1 215 674 6000
Fax:
+1 215 674 7183
