ABB CBXi Series User Manual Download Page 5

Page: 5 / 73

CBXi IP Controller |

The CBXi Series

Subject to change without notice

WWW.CYLON.COM

MAN

v 2

The CBXi Series

INTRODUCTION

The

CBXi-8R8 and CBXi-8R8-H

are fully programmable IP-based BTL-listed

BACnet®

Building Controllers

(B-BC)

that supports simultaneous multi-protocol communications including

BACnet/IP

BACnet MS/TP

Modbus TCP,

and

Modbus RTU

Part of Cylon’s

CB Line

BACnet

field controllers, the

CBXi Series

of controllers are built on an extendible

platform that features 8

UniPuts™

with Relay and 8 Universal Inputs

and feature support for up to five

FLX

(Field Level e

pansion) Series extension modules providing a scalable solution from 16 up to 96

points of control.

FLX

expansion modules are available in a variety of options to allow maximum

flexibility in achieving the required point configuration. The

CBXi-8R8-H

provides local Hand-Off-Auto

override functionality.
The fully programmable

CBXi-8R8(-H)

can be tailored to meet a variety of applications by creating and

modifying strategies using Cylon's

CXpro

ᴴᴰ

programming interface.

APPLICATION

The

CBXi-8R8(-H)

is designed for a wide range of energy management applications for intelligent control

of:

•

HVAC

equipment such as Central Plant, Boilers, Chillers, Cooling Towers, Pump Systems, Air Handling

Units (Constant Volume, Variable Air Volume, and Multi-zone), and Rooftop Units,

•

Electrical systems such as lighting control, variable frequency drives and metering.

The

CBXi-8R8(-H)

can be used as an integration platform and natively supports the routing of either

BACnet MS/TP

BACnet/IP

Modbus RTU

Modbus TCP

without the need for gateways or additional

hardware.

Summary of Contents for CBXi Series










































































Search results

Summary of Contents for CBXi Series

Reviews:

Related manuals for CBXi Series

Brands by name

Popular brands

ABB CBXi Series, User Manual

Search results

Summary of Contents for CBXi Series

Reviews:

Related manuals for CBXi Series

Brands by name

Popular brands