ABB AWIN GW100, User Manual

Page: 40 / 68

VIEW D EVIC ES CO NFIGU R ATIO N
36 3BNP1029 12 C
After entering all the MAC addresses and corresponding Join Keys, reboot the gateway and
allow approximately 30 minutes to 1 hour for the network to form.
6.6.2 Channel Blacklist
Channel blacklisting is a way of limiting the number of channels used in a network. When
channels are blacklisted, they are not used in the network.
Although the network may operate on as few as five channels, it is recommended that the
network run on as many channels as possible for more overall available bandwidth. Note that
the number of usable channels must be an odd number.
To blacklist a channel, enter the frequency of the Channel Blacklist field. The channel must be
blacklisted in pairs. Table 11 lists the frequency of each channel.
Table 11: Frequency of each channel of Network
Channel No. Frequencies Channel No. Frequencies
1 2405 9 2445
2 2410 10 2450
3 2415 11 2455
4 2420 12 2460
5 2425 13 2465
6 2430 14 2470
7 2435 15 2475
8 2440
6.7 View Devices
Click Configuration > WirelessHART > Devices in the left navigation column to view the num-
ber of devices in the WirelessHART network.
Figure 15: Device Information screen
The device information page displays data about the devices in the WirelessHART network.
The Device ID is used for addressing the device via Modbus TCP. Devices connected to Wire-
lessHART adapters appear below the adapter and do not have a MAC address.