ABB ACSM1 Series, User Manual

Page: 29 / 46

Operation
29
How to change the value of bit pointer parameter to fixed 0 (FALSE) or 1 (TRUE)
The bit pointer parameter can be fixed to constant value of 0 (FALSE) or 1 (TRUE).
When adjusting a bit pointer parameter on the control panel, CONST is selected in
order to fix the value to 0 (displayed as C.FALSE.) or 1 (C.TRUE.).
For more information, see appropriate Firmware Manual .
Step Action Display
1. Go to the Main menu by pressing if you are in the Output mode, otherwise
by pressing repeatedly until you get to the Main menu.
2. Go to the Parameters option by selecting PARAMETERS on the menu with
keys
and , and pressing .
3. Select the appropriate parameter group with keys and . Here the
bit pointer parameter 12.04 DI01 OUT PTR is used as an example.
4. Press to select the appropriate parameter group. Select the appropriate
parameter with keys and . Current value of each parameter is
shown below its name.
5. Press .
Select CONST with keys and .
6. Press .
7. Specify a new constant value (TRUE or FALSE) for the bit pointer parameter
with keys
and .
MENU
EXIT
PARAMETERS
FAULT LOGGER
TIME & DATE
EXIT ENTER 00:00
MAIN MENU 1 LOC
ENTER
01 ACTUAL VALUES
02 I/O VALUES
03 CONTROL VALUES
04 POS CTRL VALUES
06 DRIVE STATUS
EXIT SEL 00:00
PAR GROUPS 01 LOC
12 DIGITAL IO
13 ANALOGUE INPUTS
15 ANALOGUE OUTPUTS
16 SYSTEM
17 PANEL DISPLAY
EXIT SEL 00:00
PAR GROUPS 12 LOC
SEL
1201 DI01 CONF 9901
1202 DI02 CONF
1203 DI03 CONF
1204 DI01 OUT PTR
P.06.02.02
PARAMETERS
EXIT EDIT 00:00
LOC
EDIT
1204 DI01 OUT PTR
PAR EDIT
Pointer
CANCEL NEXT 00:00
LOC
1204 DI01 OUT PTR
PAR EDIT
Const
CANCEL NEXT 00:00
LOC
NEXT
1204 DI01 OUT PTR
PAR EDIT
C. FALSE
CANCEL SAVE 00:00
[0]
LOC
1204 DI01 OUT PTR
PAR EDIT
C. TRUE
CANCEL SAVE 00:00
[1]
LOC