ABB ACS880-x04, Firmware Manual

Page: 386 / 604

386 Parameters
Other Source selection (see Terms and abbreviations on page 114 ). -
62.46 Data set 1 data 2
selection Defines a target for the data received as word 2 of data set 1.
See also parameter
62.96 Data set 1 data 2 value .
For the selections, see parameter 62.45 Data set 1 data 1
selection .
None
62.47 Data set 1 data 3
selection See parameter 62.45 Data set 1 data 1 selection . None
… … … …
62.50 Data set 3 data 3
selection See parameter 62.45 Data set 1 data 1 selection . None
62.51 Data set 10 data 1
selection Parameters 62.51 … 62.74 define a target for the data received
in data sets 10, 12, 14, 16, 18, 20, 22 and 24 from the external
controller.
Parameters
62.101 … 62.124 display the data received from
the external controller in integer format, and can be used as
sources by other parameters.
For example, this parameter selects a target for word 1 of data
set 10. Parameter
62.101 Data set 10 data 1 value displays
the received data in integer format, and can also be used as a
source by other parameters.
None
None None. 0
CW 16bit Control Word (16 bits) 1
Ref1 16bit Reference REF1 (16 bits) 2
Ref2 16bit Reference REF2 (16 bits) 3
Other Source selection (see Terms and abbreviations on page 114 ). -
62.52 Data set 10 data 2
selection Defines a target for the data received as word 2 of data set 10.
See also parameter
62.102 Data set 10 data 2 value .
For the selections, see parameter 62.51 Data set 10 data 1
selection .
None
62.53 Data set 10 data 3
selection Defines a target for the data received as word 3 of data set 10.
See also parameter
62.103 Data set 10 data 3 value .
For the selections, see parameter 62.51 Data set 10 data 1
selection .
None
62.54 Data set 12 data 1
selection See parameter 62.51 Data set 10 data 1 selection . None
… … … …
62.74 Data set 24 data 3
selection See parameter 62.51 Data set 10 data 1 selection . None
62.95 Data set 1 data 1
value Displays (in integer format) the data received from the
external controller as word 1 of data set 1.
A target for this data can be selected by parameter
62.45 Data
set 1 data 1 selection . The value can also be used as a source
by another parameter.
0
0…65535 Data received as word 1 of data set 1.
62.96 Data set 1 data 2
value Displays (in integer format) the data received from the
external controller as word 2 of data set 1.
A target for this data can be selected by parameter
62.46 Data
set 1 data 2 selection . The value can also be used as a source
by another parameter.
0
0…65535 Data received as word 2 of data set 1.
No. Name/Value Description Def / FbEq16