![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539385.webp)
Parameters 385
In the master, displays the status of the communication with
followers specified by parameter
.
-
0000h…FFFFh
M/F communication status (followers 17…32).
1 = 1
In the master, displays the ready status of the communication
with followers specified by parameter
-
0000h…FFFFh
Follower 1…16 ready status.
1 = 1
In the master, displays the ready status of the communication
with followers specified by parameter
-
0000h…FFFFh
Follower 17…32 ready status.
1 = 1
…
define a target for the data received
in data sets 1 and 3 from the external controller. These data
sets are used in ModuleBus communication with a “standard
drive” (
).
display the data received from the
external controller in integer format, and can be used as
sources by other parameters.
For example, this parameter selects a target for word 1 of data
set 1. Parameter
displays the
received data in integer format, and can also be used as a
source by other parameters.
None
None.
0
CW 16bit
Control Word (16 bits)
1
Ref1 16bit
Reference REF1 (16 bits)
2
Ref2 16bit
Reference REF2 (16 bits)
3
No.
Name/Value
Description
Def
/
FbEq16
Bit
Name
Description
0
Follower 17
1 = Communication with follower 17 OK.
1
Follower 18
1 = Communication with follower 18 OK.
…
…
…
15
Follower 32
1 = Communication with follower 32 OK.
Bit
Name
Description
0
Follower 1
1 = Follower 1 ready.
1
Follower 2
1 = Follower 2 ready.
…
…
…
15
Follower 16
1 = Follower 16 ready.
Bit
Name
Description
0
Follower 17
1 = Follower 17 ready.
1
Follower 18
1 = Follower 18 ready.
…
…
…
15
Follower 32
1 = Follower 32 ready.
Summary of Contents for ACS880-x04
