294 Parameters
CW 16bit
Control Word (16 bits)
1
Ref1 16bit
Reference REF1 (16 bits)
2
Ref2 16bit
Reference REF2 (16 bits)
3
CW 32bit
Control Word (32 bits)
11
Ref1 32bit
Reference REF1 (32 bits)
12
Ref2 32bit
Reference REF2 (32 bits)
13
CW2 16bit
Control Word 2 (16 bits)
21
Source selection (see
on
page
-
…
…
…
…
.
54
Fieldbus adapter B configuration.
Displays the type of the connected fieldbus adapter
module.
0 = Module is not found or is not properly connected, or is
disabled by parameter
; 1 = FPBA;
32 = FCAN; 37 = FDNA; 101 = FCNA, 128 = FENA-11/21;
135 = FECA; 136 = FEPL; 485 = FSCA.
This parameter is read-only.
-
are adapter module-specific.
For more information, see the documentation of the
fieldbus adapter module. Note that not all of these
parameters are necessarily in use.
-
0…65535
Fieldbus adapter configuration parameter.
1 = 1
…
…
…
…
-
0…65535
Fieldbus adapter configuration parameter.
1 = 1
Validates any changed fieldbus adapter module
configuration settings. After refreshing, the value reverts
automatically to
.
Note: This parameter cannot be changed while the drive is
running.
Done
Refreshing done.
0
Refresh
Refreshing.
1
Displays the parameter table revision of the fieldbus
adapter module mapping file (stored in the memory of the
drive).
In format axyz, where ax = major table revision number; yz
= minor table revision number.
This parameter is read-only.
-
Parameter table revision of adapter module.
-
Displays the drive type code in the fieldbus adapter
module mapping file (stored in the memory of the drive).
This parameter is read-only.
-
0…65535
Drive type code stored in the mapping file.
1 = 1
No.
Name/Value
Description
Def/
FbEq16
Summary of Contents for ACS880 ESP
