ABB ACS880 ESP, Firmware Manual

Page: 253 / 494

Parameters 253
32.16 Supervision 2 action Selects the action the drive takes when the value
monitored by signal supervision 2 exceeds its limits.
Note: This parameter does not affect the status indicated
by
32.01 Supervision status .
No action
No action No action taken. 0
Warning A warning ( A8B1 Signal supervision 2 ) is generated. 1
Fault The drive trips on 80B1 Signal supervision 2 . 2
32.17 Supervision 2 signal Selects the signal to be monitored by signal supervision
function 2.
For the available selections, see parameter
32.07
Supervision 1 signal .
Zero
32.18 Supervision 2 filter
time Defines a filter time constant for the signal monitored by
signal supervision 2. 0.000 s
0.000…30.000 s Signal filter time. 1000 = 1 s
32.19 Supervision 2 low Defines the lower limit for signal supervision 2. 0.00
-21474830.00
…21474830.00 Low limit. -
32.20 Supervision 2 high Defines the upper limit for signal supervision 2. 0.00
-21474830.00
…21474830.00 Upper limit. -
32.25 Supervision 3
function Selects the mode of signal supervision function 3.
Determines how the monitored signal (see parameter
32.27 ) is compared to its lower and upper limits ( 32.29 and
32.30 respectively). The action to be taken when the
condition is fulfilled is selected by 32.26 .
Disabled
Disabled Signal supervision 3 not in use. 0
Low Action is taken whenever the signal falls below its lower
limit. 1
High Action is taken whenever the signal rises above its upper
limit. 2
Abs low Action is taken whenever the absolute value of the signal
falls below its (absolute) lower limit. 3
Abs high Action is taken whenever the absolute value of the signal
rises above its (absolute) upper limit. 4
Both Action is taken whenever the signal falls below its low limit
or rises above its high limit. 5
Abs both Action is taken whenever the absolute value of the signal
falls below its (absolute) low limit or rises above its
(absolute) high limit. 6
32.26 Supervision 3 action Selects the action the drive takes when the value
monitored by signal supervision 3 exceeds its limits.
Note: This parameter does not affect the status indicated
by
32.01 Supervision status .
No action
No action No action taken. 0
Warning A warning ( A8B2 Signal supervision 3 ) is generated. 1
Fault The drive trips on 80B2 Signal supervision 3 . 2
No. Name/Value Description Def/
FbEq16