ABB ACS850 series, User Manual

Page: 26 / 48

Operation
26
How to change the value of bit pointer parameter to fixed 0 (FALSE) or 1 (TRUE)
The bit pointer parameter can be fixed to constant value of 0 (FALSE) or 1 (TRUE).
When adjusting a bit pointer parameter on the control panel, CONST is selected in
order to fix the value to 0 (displayed as C.FALSE) or 1 (C.TRUE).
For more information, see appropriate Firmware Manual .
Step Action Display
1. Go to the Main menu by pressing if you are in the Output mode, otherwise
by pressing repeatedly until you get to the Main menu.
2. Go to the Parameters option by selecting PARAMETERS on the menu with
keys
and , and pressing .
Select the appropriate parameter group with keys and . Here the
bit pointer parameter 14.07 DI02 OUT SRC is used as an example.
3. Press to select the appropriate parameter group. Select the appropriate
parameter with keys and . Current value of each parameter is
shown below its name.
4. Press .
Select CONST with keys and .
5. Press .
6. Specify a new constant value (TRUE or FALSE) for the bit pointer parameter
with keys
and .
MENU
EXIT PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT ENTER 00:00
MAIN MENU 1 LOC
ENTER
01 Actual values
02 I/O values
03 Control values
04 Appl values
06 Drive status
EXIT SEL 00:00
PAR GROUPS 01 LOC
10 Start/stop/dir
11 Start/stop mode
12 Operating mode
13 Analogue inputs
14 Digital I/O
EXIT SEL 00:00
PAR GROUPS 14 LOC
SEL
1401 DI01 Ton 9901
1405 DI01 Toff
1406 DI02 conf
1407 DI02 out src
P.06.02.03
PARAMETERS
EXIT EDIT 00:00
LOC
EDIT
1407 DI02 out src
PAR EDIT
Pointer
CANCEL NEXT 00:00
LOC
1407 DI02 out src
PAR EDIT
Const
CANCEL NEXT 00:00
LOC
NEXT
C. FALSE
1407 DI02 out src
PAR EDIT
CANCEL SAVE 00:00
[0]
LOC
C. TRUE
1407 DI02 out src
PAR EDIT
CANCEL SAVE 00:00
[1]
LOC