ABB ACS580-04, Hardware Manual

Page: 256 / 298

Layout
1
1
3
1
5
2
4
6
3
7
Analog outputs (3) Analog inputs (1)
Analog output 3 signal AO3 86 Analog input 3 positive signal AI3+ 80
Analog ground potential AGND 87 Analog input 3 negative signal AI3- 81
Cable shield connection SCR 88 Cable shield connection SCR 82
Analog output 4 signal AO4 89 Analog input 4 positive signal AI4+ 83
Analog ground potential AGND 90 Analog input 4 negative signal AI4- 84
Cable shield connection SCR 91 Cable shield connection SCR 85
Grounding hole 4 Analog output scale switch (2) 2
Diagnostic LED 6 Control unit SLOT 2 interface 5
- Grounding hole 7
Mechanical installation
￭
Necessary tools
• Screwdriver and a set of suitable bits.
￭ Unpacking and examining the delivery
1. Open the option package. Make sure that the package contains:
•
the option module
• a mounting screw.
2. Make sure that there are no signs of damage.
￭
Installing the module
See section Installing option modules (page 110) .
256 CBAI-01 bipolar analog IO adapter module