360 Parameters
Enables/disables a Modbus user to access a select set of
parameters using 550 register numbering.
Disable
Using 550 compatibility mode is disabled.
0
Enable
Using 550 compatibility mode is enabled.
1
(Visible when user lock is open)
To change the current user pass code, enter a new code into
this parameter as well as
. A
warning will be active until the new pass code is confirmed.
To cancel changing the pass code, close the user lock without
confirming. To close the lock, enter an invalid pass code in
parameter
, activate parameter
, or cycle the power.
(page
).
10000000
10000000…
99999999
New user pass code.
-
(Visible when user lock is open)
Confirms the new user pass code entered in
10000000…
99999999
Confirmation of new user pass code.
-
(Visible when user lock is open)
Selects the actions or functionalities to be prevented by the
user lock. Note that the changes made take effect only when
the user lock is closed. See parameter
Note:
We recommend you select all the actions and
functionalities unless otherwise required by the application.
0000h
No.
Name/Value
Description
Def/FbEq16
Bit
Name
Information
0
Disable ABB access
levels
1 = ABB access levels (service, advanced programmer, etc.; see
) disabled
1
Freeze parameter
lock state
1 = Changing the parameter lock state prevented, ie. pass code
358 has no effect
2
Disable file
download
1 = Loading of files to drive prevented. This applies to
• firmware upgrades
• parameter restore
• changing home view of control panel
• editing drive texts
• editing the favorite parameters list on control panel
• configuration settings made through control panel such as
time/date formats and enabling/disabling clock display.
3…6
Reserved
7
Disable panel
Bluetooth
1 = Bluetooth disabled on ACS-AP-W control panel. If the drive is
part of a panel bus, Bluetooth is disabled on all panels.
8...10
Reserved
11
Disable OEM access
level 1
1 = OEM access level 1 disabled
12
Disable OEM access
level 2
1 = OEM access level 2 disabled
13
Disable OEM access
level 3
1 = OEM access level 3 disabled
14…15 Reserved
Summary of Contents for ACS560
