ABB ACS 800 Series, Application Manual

Page: 35 / 44

Actual signals and parameters in ACS800 Standard Application Program
35
PAR 22.08&09 Acceleration and deceleration times given by parameters 22.08 and 22.09 15
22.08 ACC PTR Selects the source for 22.01 100 = 1 s
-255.255.31 …
+255.255.31 / C.-32768
… C.32767 Parameter pointer or constant value. See Parameter 10.04.
22.09 DEC PTR Selects the source for 22.01 100 = 1 s
-255.255.31 …
+255.255.31 / C.-32768
… C.32767 Parameter pointer or constant value. See Parameter 10.04.
26 MOTOR CONTROL Parameters through which the Adaptive Program can control the flux of the
drive.
26.06 FLUX REF PTR Selects the source for the flux reference.
-255.255.31 …
+255.255.31 / C.-32768
… C.32767 Parameter pointer or constant value. See Parameter 10.04.
40 PID CONTROL Parameters through which the Adaptive Program can affect on the process
PID control.
40.07 ACTUAL1 INPUT SEL
PARAM 40.25 Source selected by parameter 40.25 . 6
40.25 ACTUAL1 PTR Selects the source for 40.07 100 = 1%
-255.255.31 …
+255.255.31 / C.-32768
… C.32767 Parameter pointer or constant value. See Parameter 10.04.
83 ADAPT PROG CTRL Execution control of the Adaptive Program.
83.01 ADAPT PROG CMD Selects the operation mode for the Adaptive Program.
STOP Stop. The program cannot be edited.
START Run. The program cannot be edited.
EDIT Stop to edit mode. The program can be edited.
83.02 EDIT COMMAND Selects the command for the block placed in the location defined by
parameter
83.03 . The program must be in edit mode. (See parameter 83.01. )
NO Home value. The value automatically restores to NO after an editing
command has been executed.
PUSH Shifts the block in the location defined by parameter 83.03 and the
subsequent blocks one location up. A new block can be placed in the emptied
location by programming the Block Parameter Set as usual.
Example: A new block needs to be placed in between the current block
number four (parameters 84.20…84.25) and five (parameters 84.25…84.29).
In order to do this:
- Shift the program to the edit mode by parameter
83.01 .
- Select location number five as the desired location for the new block by
parameter
83.03 .
- Shift the block in location number 5 and all subsequent blocks one location
forward by parameter
83.02 (selection PUSH).
- Program the emptied location number 5 by parameters 84.25 to 84.29 as
usual.
DELETE Deletes the block in the location defined by parameter 83.03 and shifts the
subsequent blocks one step down.
Index Parameter name /
value
Description FbEq