ABB ACS 600, Hardware Manual

Page: 40 / 52

Appendix A – ACS/ACC 600 Technical Data
A-20 601/604/607 US Supplement
Protection Features Application program dependent features of the ACx 600 are listed
below.
available as standard, optional
Preprogrammed Warnings: ACS 600 temperature, Motor
Identification Run, Drive Identification Number change, User Macro,
Programmable Automatic Reset Functions (ACS 600 only): after
overcurrent, overvoltage, undervoltage and analog input below
minimum value
Information Functions: ACx 600 control software version, ACx 600
application software version, ACx 600 test date.
Preprogrammed
Faults
ACS ACC Multi
Drive
Programmable Fault
Functions
ACS ACC Multi
Drive
Program.
Supervision
Functions
ACS ACC Multi
Drive
ACx 600 temperature Analog input below
minimum value Speed 2 2
Overcurrent Loss of Control Panel Motor current
Short circuit External fault Motor torque 2 2
DC overvoltage Motor over temperature Motor speed
Supply phase Thermistor/Pt 100 Reference 1
DC under voltage Motor stalled Reference 2
Over frequency Motor underload Actual value 1
Overspeed Loss of motor phase Speed
threshold
Internal fault Ground fault Torque
threshold
Internal fault on the
I/O control board Speed measurement Position error
Ambient temperature Motor overspeed Position
threshold
User Macro Torque Joystick
Braking chopper (in
fieldbus mode) Torque proving Brake long
falling time
Inverter overload Brake
No motor data Communication test
ID Run fail Following error
Position limits
Maximum speed
alteration
Speed difference
Communication error
Encoder interface
module