ABB ACQ80, Firmware Manual

Page: 16 / 390

16 Introduction to the manual
Categorization by frame (size)
The ACQ80 is manufactured in several frames (frame sizes), which are denoted
as RN, where N is an integer. Some information which only concern certain
frames are marked with the symbol of the frame (RN).
The frame is marked on the type designation label attached to the drive, see
section Type designation label in the hardware manual of the drive.
Cybersecurity disclaimer
This product is designed to be connected to and to communicate information
and data via a network interface. It is Customer's sole responsibility to provide
and continuously ensure a secure connection between the product and
Customer network or any other network (as the case may be). Customer shall
establish and maintain any appropriate measures (such as but not limited to
the installation of firewalls, application of authentication measures, encryption
of data, installation of anti-virus programs, etc) to protect the product, the
network, its system and the interface against any kind of security breaches,
unauthorized access, interference, intrusion, leakage and/or theft of data or
information. ABB and its affiliates are not liable for damages and/or losses
related to such security breaches, any unauthorized access, interference,
intrusion, leakage and/or theft of data or information.
PROFIBUS,
PROFIBUS DP,
PROFINET IO
Registered trademarks of PI - PROFIBUS & PROFINET International
R0, R1,... Frame (size)
RO
Relay output; interface for a digital output signal. Implemented with
a relay.
Rectifier
Converts alternating current and voltage to direct current and
voltage.
STO
Safe torque off. See chapter The Safe torque off function in the
hardware manual of the drive.
Term/
abbreviation Explanation