can be used in energy recovery. Printed circuit boards and large electrolytic capacitors
need selective treatment according to IEC 62635 guidelines. To aid recycling, plastic
parts are marked with an appropriate identification code.
Contact your local ABB distributor for further information on environmental aspects and
recycling instructions for professional recyclers. End of life treatment must follow
international and local regulations.
Applicable standards
The drive complies with the following standards:
Safety of machinery – Safety related parts of the control systems – Part 1:
general principles for design
EN ISO 13849-1:2015
Safety of machinery – Safety-related parts of the control systems – Part 2:
Validation
EN ISO 13849-2:2012
Safety of machinery. Electrical equipment of machines. Part 1: General
requirements. Provisions for compliance: The final assembler of the
machine is responsible for installing
• an emergency-stop device
• a supply disconnecting device
EN 60204-1:2006 +
A1:2009 + AC:2010
Safety of machinery – Functional safety of safety-related electrical,
electronic and programmable electronic control systems
EN 62061:2005 +
AC:2010 + A1:2013 +
A2:2015
Adjustable speed electrical power drive systems. Part 3: EMC require-
ments and specific test methods
EN 61800-3:2004 +
A1:2012
IEC 61800-3:2004 +
A1:2011
Adjustable speed electrical power drive systems – Part 5-1: Safety re-
quirements – Electrical, thermal and energy
IEC/EN 61800-5-
1:2007
UL Standard for adjustable speed electrical power drive systems – Part 5-
1: Safety requirements – Electrical, thermal and energy
ANSI/UL 61800-5-
1:2015
Adjustable speed drives
CSA C22.2 No. 274-13
Markings
The applicable markings are shown on the type designation label of the drive.
CE mark
Product complies with the applicable European Union legislation. For fulfilling the EMC
requirements, see the additional information concerning the drive EMC compliance
(IEC/EN 61800-3).
TÜV Safety Approved mark (functional safety)
Product contains Safe Torque Off and possibly other (optional) safety functions which
are certified by TÜV according to the relevant functional safety standards. Applicable
to drives and inverters; not applicable to supply, brake or DC/DC converter units or
modules.
148 Technical data
Summary of Contents for ACH480
