ABB AC-AP Series User Manual Download

Page: 33 / 74

Functions in the main Menu 33

Functions in the main Menu

What this chapter contains

The chapter describes the functions in the main

Menu

All functions of the control panel are accessed
through the

Menu

which is the main menu of the

user interface. The sub-menus of the

Menu

are

listed below and they are described in more
detail in the subsequent sections. The sub-
menus depend on the product that is controlled
with the control panel.

The following sub-menus varies based on the drive/device to which the panel is
connected:

Sub-menu

Function

See page...

Parameters

View and edit parameters.

Assistants

Launch an assistant.

Energy efficiency

Use energy-saving features.

Event log

View information on faults and warnings.

History graphs

View the load profile.

Backups

Save settings in the control panel memory and restore them
to the drive.

System info

View information on the drive and options.

Settings

View and change time and date settings, language, display
and other settings, and edit texts.

Summary of Contents for AC-AP Series









































































Search results

Summary of Contents for AC-AP Series

Reviews:

Related manuals for AC-AP Series

Brands by name

Popular brands

ABB AC-AP Series, User Manual

Search results

Summary of Contents for AC-AP Series

Reviews:

Related manuals for AC-AP Series

Brands by name

Popular brands