ABB AC-AP Series User Manual Download

Page: 40 / 74

40 Functions in the main Menu

The control panel collects data and generates the code.

Press << or >> to navigate to the next screen.
You can also generate QR code from

Menu

→

System info

→

QR code.

See

System info

(page

Energy efficiency

In the Energy efficiency menu, you can view and
configure parameters related to energy savings,
such as kWh counters.

Event log

In the

Event log

menu, you can view information

collected on faults and warnings. Events are
automatically logged. See

Fault tracing

(page

)

for more information on faults and warnings.

•

Faults

sub-menu displays the faults that

are tripped the drive.

•

Other events

sub-menu displays all other

faults, and warnings and their details.

•

Active faults

and

Active warnings

sub-menu displays the faults and

warnings which are active.

Summary of Contents for AC-AP Series









































































Search results

Summary of Contents for AC-AP Series

Reviews:

Related manuals for AC-AP Series

Brands by name

Popular brands

ABB AC-AP Series, User Manual

Search results

Summary of Contents for AC-AP Series

Reviews:

Related manuals for AC-AP Series

Brands by name

Popular brands