ABB AC 800M, Configuration

Page: 148 / 260

Configuring S200 Adapter Section 4 Configuration
148 9ARD000014-600 A
Configuring S200 Adapter
Table 25. Settings for S200 Adapter
Parameter Default Value Description Consequence of Change
IP Address
(See
information
note below)
Empty String IP address of the S200
adapter will use on the
network. It must be an
IP address on the same
subnet as the CI873 it's
placed under.
If blank, the first three
fields are taken from its
parent CI873 IP
Address and the fourth
is from its hardware tree
position.
Connections to the I/O
modules connected under
the adapter are
reestablished.
For configuring the S200 adapter in the hardware tree double-click
200-AENTR
or
right-click and select
Editor
from the context menu. This opens the
Hardware
Editor
, as shown in Figure 60 .
The Hardware Editor contains three tabs — Settings, Connections and Unit Status.
The parameters for configuring the S200 adapter are found in the
Settings
tab.
Configure the parameters according to the description of parameters given in
Table 25 .
Figure 60. Hardware Editor – Settings for S200 Adapter