ABB Ability 800xA Series, User Manual

Page: 65 / 122

Section 3 Configuration Configuration
3BSE037076-510 D 65
Configuration
If the
AoWebServerNode
is protected with firewall, ensure that the ports
443
(HTTPS) or
80
(HTTP) is open in the firewall based on the communication
protocol selected in the
Asset Optimization Configuration
aspect.
The
Web View
aspects communicate with the
AOWebServerNode
in the provider
system using the Hypertext Transfer Protocol Secure (HTTPS) / Hypertext Transfer
Protocol (HTTP) communication protocol.
During upload, the default configuration is to use the
AOWebServerNode
host
name and
HTTPS
protocol. The default configuration can be changed using the
Asset Optimization Configuration
aspect.
Asset Optimization Configuration Aspect
The
Asset Optimization Configuration
aspect is added to the
Remote System
Object
that represents the provider system in the subscriber system, when the
Remote Access Service
is started. This aspect controls the communication
parameters that are used by the Asset Optimization
Web View
aspects.
The main view of this aspect (see Figure 40 ) shows the current configuration
parameters for the Communication Protocol and the AoWebServerNode Host Name
or IP Address that are used in the communication.
Fault Report Submitter Fault Report Submitter Web View
CMMS View(s) CMMS Web View(s)
Table 1. Mapping for Asset Optimization aspects and Web View aspect
Provider System Subscriber System