Operation Manual / 4 Product description / A100-L
8 Disassembly and assembly / 8.9 Dismantling the gas inlet casing (
≤
A175-L)
© Copyright 2020 ABB. All rights reserved.
HZTL4034_EN
Rev.P
January 2020
8.9
Dismantling the gas inlet casing (
≤
A175-L)
8.9.1
Variant with screw
Dismantling the gas inlet casing (A175-L and smaller) – screwed variant
Fig. 40: Dismantling the gas inlet casing (A175-L and smaller) – screwed variant
u
If one of the screws (61009) shears off when loosening, an ABB Turbocharging Service
Station should be contacted.
1. Loosen crosswise and remove all but two opposite screws (61009).
2. Fit two guide studs (90317) in the upper area on the gas outlet casing.
3. Loop around the gas inlet casing (51001) with lifting gear.
4. Loosen and remove remaining screws (61009).
5. Carefully move out gas inlet casing and put down, remove guide studs.
Page
68
/
112
