![background image](http://html.mh-extra.com/html/abb/1sbp260182r1001/1sbp260182r1001_installation-and-operation-manual_2294020.webp)
Operation
20
ABB, 1SBC159102M0202
Also make sure that communication parameters are correctly configured. Select
File/Upload Application
in CP400Soft and the
Save As
dialog box will appear
on the screen. Enter the name of a firmware file (*.AF6) to save. Click
Save
.
Then the operator terminal will prompt for a password: enter the password set
in CP400Soft from
Application/Workstation Setup
. Once the correct password
is entered, the operator terminal starts to upload the application to the PC. For
information about setting a password, please see section
.
While the operator terminal is uploading, the following is displayed:
After uploading, select
File/Reconstruct Source
in CP400Soft to display the
Open
dialog. Open the uploaded application file (*.C64 or *.AA6). The appli-
cation screen will be displayed on the PC monitor. Finally, select
File/Save As
to
save the application as a *.V6F file. Thus a source file can serve the purposes of
maintenance and modification.
Note:
When uploading for the first time, make sure to first run the application once, or
else the upload function will not work.